Login    Register

How do I remove the wiper arms?

Need help or advice fitting or fixing something
  • Author
    Message

How do I remove the wiper arms?

Postby valred » Sun, 08 Jun 2008 4:59 +0000

Hi gentles,
The wiper arms are in a shocking state and I have just ordered chrome wipers.

So I would like to remove the arms, strip them and spray them.

Suggestions please!!!

val
valred
***

User avatar
 
Posts: 150
Joined: Fri, 18 Apr 2008 6:31 +0000
Location: Wexford

Postby mx5ash » Sun, 08 Jun 2008 5:22 +0000

each one is bolted on at the base of the arm. Might be a little plastic cover over it which just pops off. They are splined so be careful putting them back on and make sure you have them in the right spot or you'll be taking them back off again when they start hitting the edge of the screen (said from experience there) I do mine with black hamerite every year or two.
Image

http://www.cardomain.com/ride/3099765
"When I make a key the on position and push the button, an engine works"
mx5ash
*****

User avatar
 
Posts: 2234
Joined: Mon, 30 Jul 2007 10:34 +0000
Location: Dungarvan, Co Waterford

Postby valred » Sun, 08 Jun 2008 8:52 +0000

..............sorry Ash...........for the dunces at the back of the class could you explain 'splined'? I presume I need a wratchet (flip! how do you spell it) thing to get at the bolt vertically? My god, just spent an hour waxing it and haven't the energy to be splining stuff!!!!

ta though! (where are my manners?)
:oops:
valred
***

User avatar
 
Posts: 150
Joined: Fri, 18 Apr 2008 6:31 +0000
Location: Wexford

Postby mx5ash » Sun, 08 Jun 2008 9:31 +0000

No its just a normal bolt. Yes you will need a socket to get the bolt off. What i meant by the splined bit is that the inside of the hole has lots of little ridges on it and so does the shaft that it slots on to. It doesn't really matter as it will
become clear when you have it off.

Pop up the cap (if there is one)
Get your socket set and undo the bolt (remember lefty loosey!!!)
Pull the wiper arm firmly stright up (because of the splines)

And to coin a classic phrase - refitting is the reversal of removal.
Image

http://www.cardomain.com/ride/3099765
"When I make a key the on position and push the button, an engine works"
mx5ash
*****

User avatar
 
Posts: 2234
Joined: Mon, 30 Jul 2007 10:34 +0000
Location: Dungarvan, Co Waterford

Postby valred » Sun, 08 Jun 2008 9:36 +0000

[quote="mx5ash"]
Get your socket set ......
quote]

Ash! I'm a girl! I have TWO screw drivers (flat and cross), one hammer and a pliers and a twisty wratchet thing!!!

My god man! Socket SET.....I would be lucky if I have A socket!

Will probably have all the wheels and doors off tomorrow trying to undo this splined bolt!!!!!!! :twisted:
valred
***

User avatar
 
Posts: 150
Joined: Fri, 18 Apr 2008 6:31 +0000
Location: Wexford

Postby mx5ash » Sun, 08 Jun 2008 10:21 +0000

A twisty ratchet thingy should do you once you have the right size socket.
The bit that the wiper arms fit on to look like this
Image
Like i said don't worry about them i should have mentioned them!!! Do what i said and you will be fine it really is easy.
Image

http://www.cardomain.com/ride/3099765
"When I make a key the on position and push the button, an engine works"
mx5ash
*****

User avatar
 
Posts: 2234
Joined: Mon, 30 Jul 2007 10:34 +0000
Location: Dungarvan, Co Waterford

Postby valred » Sun, 08 Jun 2008 10:59 +0000

Image

ahhhhhhhhhhhhhhhh so kemosabe!

No problem

Understand the spined thing now.

You are wise and noble.

wax on........wax off.
valred
***

User avatar
 
Posts: 150
Joined: Fri, 18 Apr 2008 6:31 +0000
Location: Wexford

Postby mx5ash » Sun, 08 Jun 2008 11:10 +0000

Good luck my child
Image
Image

http://www.cardomain.com/ride/3099765
"When I make a key the on position and push the button, an engine works"
mx5ash
*****

User avatar
 
Posts: 2234
Joined: Mon, 30 Jul 2007 10:34 +0000
Location: Dungarvan, Co Waterford

Postby mx5ash » Mon, 09 Jun 2008 10:26 +0000

Well how did you get on with this val
Image

http://www.cardomain.com/ride/3099765
"When I make a key the on position and push the button, an engine works"
mx5ash
*****

User avatar
 
Posts: 2234
Joined: Mon, 30 Jul 2007 10:34 +0000
Location: Dungarvan, Co Waterford

Postby valred » Mon, 09 Jun 2008 10:31 +0000

So sorry Sensi.........the lure of the beach.........picnic..............my one year old nephew..............warm malibu and cranberry juice.............

Tomorrow??
:oops:
:oops: :oops:
:oops: 8) :oops:
valred
***

User avatar
 
Posts: 150
Joined: Fri, 18 Apr 2008 6:31 +0000
Location: Wexford

Postby mx5ash » Mon, 09 Jun 2008 10:36 +0000

If i had the choice i know where i would have been too
Image

http://www.cardomain.com/ride/3099765
"When I make a key the on position and push the button, an engine works"
mx5ash
*****

User avatar
 
Posts: 2234
Joined: Mon, 30 Jul 2007 10:34 +0000
Location: Dungarvan, Co Waterford

Return to How do I....

Who is online

Users browsing this forum: No registered users and 4 guests

cron