Login    Register

Lots of mx5 parts, hardtop, polybushed wishbones, etc

Got something to sell, put it here
  • Author
    Message

Lots of mx5 parts, hardtop, polybushed wishbones, etc

Postby mx5ideways » Tue, 15 Jul 2014 9:58 +0000

Hardtop : €500 on its own or €550 with the full fitting kit/brackets (good cond but has a few bubbles in the paint so il sand, prime and paint it black for new buyer.
Full set of polybushed wishbones, top and bottom wishbones plus anti roll bar : €300 (polybushes alone would cost nearly €200 maybe more then you would need to remove your wishbones and bushes plus fit the new ones which is a lot of work and these are ready to go)
Doors : €50
Have loads of bumpers, interior panels, dashes, suspension, sub frames, body kit, 3 or 4 different spoilers, about 30/40 crates of parts (mainly mk1 parts though)
I also have about 8 roof frames which I might fit new skins to with fergus soon so hopefully il be selling newly skinned roofs over the next few months too.
Here's a few pics of what I have, il get more next week when I'm on hols
1990 Eunos Roadster 1.6: cusco coilovers, carbing front and rear strut braces, 1.8 brakes, performance engine and diff mounts, stage 2 cerametalic 6 puck 1.8 clutch with lightweight JUN 1.8 flywheel, 1.8 LSD, GReddy manifold, Garrett T25 turbo, ARTech down pipe, E-Manage blue ecu, Altezza injectors, FMIC. Zoom engineering center console, carbon fibre bonnet, garage vary front lip, lightweight garage hundred one hardtop, carbing 6 pt cage.
1999 mx5 1.8 RS: XYZ drift spec Coilovers, reversed Ssr dori dori mesh wheels, wide arches, custom bonnet with s15 vent, rx8 spoiler, carbon rx7 sideskirts, full Arc induction kit, heated electric leather rx8 seats.
mx5ideways
****
 
Posts: 523
Joined: Mon, 13 Aug 2007 7:36 +0000
Location: cork/limerick

Re: Lots of mx5 parts, hardtop, polybushed wishbones, etc

Postby mx5ideways » Tue, 15 Jul 2014 10:00 +0000

Image
Image
Image
Image
1990 Eunos Roadster 1.6: cusco coilovers, carbing front and rear strut braces, 1.8 brakes, performance engine and diff mounts, stage 2 cerametalic 6 puck 1.8 clutch with lightweight JUN 1.8 flywheel, 1.8 LSD, GReddy manifold, Garrett T25 turbo, ARTech down pipe, E-Manage blue ecu, Altezza injectors, FMIC. Zoom engineering center console, carbon fibre bonnet, garage vary front lip, lightweight garage hundred one hardtop, carbing 6 pt cage.
1999 mx5 1.8 RS: XYZ drift spec Coilovers, reversed Ssr dori dori mesh wheels, wide arches, custom bonnet with s15 vent, rx8 spoiler, carbon rx7 sideskirts, full Arc induction kit, heated electric leather rx8 seats.
mx5ideways
****
 
Posts: 523
Joined: Mon, 13 Aug 2007 7:36 +0000
Location: cork/limerick

Re: Lots of mx5 parts, hardtop, polybushed wishbones, etc

Postby TommisBoo » Wed, 16 Jul 2014 11:48 +0000

Any mk2.5 front bumpers?




Sent from my iPhone 5s using Tapatalk
TommisBoo
***
 
Posts: 108
Joined: Thu, 04 Apr 2013 5:31 +0000
Location: Newcastle, Co. Dublin

Re: Lots of mx5 parts, hardtop, polybushed wishbones, etc

Postby mx5ideways » Wed, 16 Jul 2014 12:17 +0000

TommisBoo wrote:Any mk2.5 front bumpers?

No I'm afraid, not many mk2 bits except one wing and door cards


Sent from my iPhone 5s using Tapatalk
1990 Eunos Roadster 1.6: cusco coilovers, carbing front and rear strut braces, 1.8 brakes, performance engine and diff mounts, stage 2 cerametalic 6 puck 1.8 clutch with lightweight JUN 1.8 flywheel, 1.8 LSD, GReddy manifold, Garrett T25 turbo, ARTech down pipe, E-Manage blue ecu, Altezza injectors, FMIC. Zoom engineering center console, carbon fibre bonnet, garage vary front lip, lightweight garage hundred one hardtop, carbing 6 pt cage.
1999 mx5 1.8 RS: XYZ drift spec Coilovers, reversed Ssr dori dori mesh wheels, wide arches, custom bonnet with s15 vent, rx8 spoiler, carbon rx7 sideskirts, full Arc induction kit, heated electric leather rx8 seats.
mx5ideways
****
 
Posts: 523
Joined: Mon, 13 Aug 2007 7:36 +0000
Location: cork/limerick

Re: Lots of mx5 parts, hardtop, polybushed wishbones, etc

Postby TommisBoo » Wed, 16 Jul 2014 12:18 +0000

Cheers ;)

Its pretty hard to find mk2.5 bumper :(


Sent from my iPhone 5s using Tapatalk
TommisBoo
***
 
Posts: 108
Joined: Thu, 04 Apr 2013 5:31 +0000
Location: Newcastle, Co. Dublin

Re: Lots of mx5 parts, hardtop, polybushed wishbones, etc

Postby Fla » Wed, 16 Jul 2014 8:56 +0000

Was that you up on donedeal? Was going to call but just didn't get five mins.

I'm interested in the low profile lights if there NCT passable. What yo yo's you need for the complete set??

Cheers,
Fla
---I'm back----
Fla
***

User avatar
 
Posts: 411
Joined: Mon, 17 Sep 2007 10:24 +0000
Location: Killarney, Co. Kerry

Re: Lots of mx5 parts, hardtop, polybushed wishbones, etc

Postby emmet.harten3 » Wed, 16 Jul 2014 10:19 +0000

just wonder how much for black soft top roof for mk1 eunos
emmet.harten3
**

User avatar
 
Posts: 63
Joined: Sat, 19 Apr 2014 3:41 +0000
Location: Virginia Cavan

Re: Lots of mx5 parts, hardtop, polybushed wishbones, etc

Postby mx5ideways » Thu, 17 Jul 2014 12:04 +0000

Fla wrote:Was that you up on donedeal? Was going to call but just didn't get five mins.

I'm interested in the low profile lights if there NCT passable. What yo yo's you need for the complete set??

Cheers,

Ya that was me, give me a call if you want, my numbers 0874151903, I presume the lights will be NCT passable, just depends on how you mount the lights to the frames, if you use spings with the bolts you can adjust each light €200 for the set inc the spare light or two, their way more new, think they were around 450 if I remember right
1990 Eunos Roadster 1.6: cusco coilovers, carbing front and rear strut braces, 1.8 brakes, performance engine and diff mounts, stage 2 cerametalic 6 puck 1.8 clutch with lightweight JUN 1.8 flywheel, 1.8 LSD, GReddy manifold, Garrett T25 turbo, ARTech down pipe, E-Manage blue ecu, Altezza injectors, FMIC. Zoom engineering center console, carbon fibre bonnet, garage vary front lip, lightweight garage hundred one hardtop, carbing 6 pt cage.
1999 mx5 1.8 RS: XYZ drift spec Coilovers, reversed Ssr dori dori mesh wheels, wide arches, custom bonnet with s15 vent, rx8 spoiler, carbon rx7 sideskirts, full Arc induction kit, heated electric leather rx8 seats.
mx5ideways
****
 
Posts: 523
Joined: Mon, 13 Aug 2007 7:36 +0000
Location: cork/limerick

Re: Lots of mx5 parts, hardtop, polybushed wishbones, etc

Postby mx5ideways » Thu, 17 Jul 2014 12:06 +0000

emmet.harten3 wrote:just wonder how much for black soft top roof for mk1 eunos

Il send you a pm as soon as I get a price for the roof skins
1990 Eunos Roadster 1.6: cusco coilovers, carbing front and rear strut braces, 1.8 brakes, performance engine and diff mounts, stage 2 cerametalic 6 puck 1.8 clutch with lightweight JUN 1.8 flywheel, 1.8 LSD, GReddy manifold, Garrett T25 turbo, ARTech down pipe, E-Manage blue ecu, Altezza injectors, FMIC. Zoom engineering center console, carbon fibre bonnet, garage vary front lip, lightweight garage hundred one hardtop, carbing 6 pt cage.
1999 mx5 1.8 RS: XYZ drift spec Coilovers, reversed Ssr dori dori mesh wheels, wide arches, custom bonnet with s15 vent, rx8 spoiler, carbon rx7 sideskirts, full Arc induction kit, heated electric leather rx8 seats.
mx5ideways
****
 
Posts: 523
Joined: Mon, 13 Aug 2007 7:36 +0000
Location: cork/limerick

Re: Lots of mx5 parts, hardtop, polybushed wishbones, etc

Postby emmet.harten3 » Sun, 20 Jul 2014 9:14 +0000

ok no boder
emmet.harten3
**

User avatar
 
Posts: 63
Joined: Sat, 19 Apr 2014 3:41 +0000
Location: Virginia Cavan

Re: Lots of mx5 parts, hardtop, polybushed wishbones, etc

Postby mx5ideways » Thu, 24 Jul 2014 2:50 +0000

Bump, 150 for the low profile lights and 250 for the full set of polybushed wishbones
1990 Eunos Roadster 1.6: cusco coilovers, carbing front and rear strut braces, 1.8 brakes, performance engine and diff mounts, stage 2 cerametalic 6 puck 1.8 clutch with lightweight JUN 1.8 flywheel, 1.8 LSD, GReddy manifold, Garrett T25 turbo, ARTech down pipe, E-Manage blue ecu, Altezza injectors, FMIC. Zoom engineering center console, carbon fibre bonnet, garage vary front lip, lightweight garage hundred one hardtop, carbing 6 pt cage.
1999 mx5 1.8 RS: XYZ drift spec Coilovers, reversed Ssr dori dori mesh wheels, wide arches, custom bonnet with s15 vent, rx8 spoiler, carbon rx7 sideskirts, full Arc induction kit, heated electric leather rx8 seats.
mx5ideways
****
 
Posts: 523
Joined: Mon, 13 Aug 2007 7:36 +0000
Location: cork/limerick

Re: Lots of mx5 parts, hardtop, polybushed wishbones, etc

Postby mx5ideways » Thu, 24 Jul 2014 2:50 +0000

mx5ideways wrote:Bump, 150 for the low profile lights and 250 for the full set of polybushed wishbones

Hardtop and re amemiya seats are sold
1990 Eunos Roadster 1.6: cusco coilovers, carbing front and rear strut braces, 1.8 brakes, performance engine and diff mounts, stage 2 cerametalic 6 puck 1.8 clutch with lightweight JUN 1.8 flywheel, 1.8 LSD, GReddy manifold, Garrett T25 turbo, ARTech down pipe, E-Manage blue ecu, Altezza injectors, FMIC. Zoom engineering center console, carbon fibre bonnet, garage vary front lip, lightweight garage hundred one hardtop, carbing 6 pt cage.
1999 mx5 1.8 RS: XYZ drift spec Coilovers, reversed Ssr dori dori mesh wheels, wide arches, custom bonnet with s15 vent, rx8 spoiler, carbon rx7 sideskirts, full Arc induction kit, heated electric leather rx8 seats.
mx5ideways
****
 
Posts: 523
Joined: Mon, 13 Aug 2007 7:36 +0000
Location: cork/limerick

Re: Lots of mx5 parts, hardtop, polybushed wishbones, etc

Postby mx5ideways » Sun, 03 Aug 2014 11:02 +0000

Polybushed wishbones sold
1990 Eunos Roadster 1.6: cusco coilovers, carbing front and rear strut braces, 1.8 brakes, performance engine and diff mounts, stage 2 cerametalic 6 puck 1.8 clutch with lightweight JUN 1.8 flywheel, 1.8 LSD, GReddy manifold, Garrett T25 turbo, ARTech down pipe, E-Manage blue ecu, Altezza injectors, FMIC. Zoom engineering center console, carbon fibre bonnet, garage vary front lip, lightweight garage hundred one hardtop, carbing 6 pt cage.
1999 mx5 1.8 RS: XYZ drift spec Coilovers, reversed Ssr dori dori mesh wheels, wide arches, custom bonnet with s15 vent, rx8 spoiler, carbon rx7 sideskirts, full Arc induction kit, heated electric leather rx8 seats.
mx5ideways
****
 
Posts: 523
Joined: Mon, 13 Aug 2007 7:36 +0000
Location: cork/limerick

Re: Lots of mx5 parts, hardtop, polybushed wishbones, etc

Postby pfr » Thu, 09 Oct 2014 10:59 +0000

Hi, have u got any standard seats that will fit a 99 mk2 ?
IF IN DOUBT........FLAT OUT!!!
pfr
*
 
Posts: 22
Joined: Mon, 15 Jun 2009 12:18 +0000
Location: Limerick, Ireland

Re: Lots of mx5 parts, hardtop, polybushed wishbones, etc

Postby MX5Spares » Fri, 10 Oct 2014 6:34 +0000

Give me a shout about the sleepy lights 086 8226506
MX5Spares
*****
 
Posts: 2303
Joined: Wed, 22 Sep 2010 4:59 +0000
Location: dublin,

Next

Return to For sale

Who is online

Users browsing this forum: No registered users and 27 guests

cron