Page 1 of 1

Mazda MX5 NC1/MK3 2L VVT LF-VE Engine needing work

PostPosted: Mon, 04 Jan 2016 3:36 +0000
by jpo
Mazda MX-5 (MX5) NC1/MK3 2L VVT LF-VE Engine + flywheel + clutch + Airbox + AFM from late 2006 Sport model with ~93K Miles on it including every ancillary in pictures (no ECU).

Fits 2005-2014 MK3/NC1, MK3.5/NC2, MK3.75/NC3 2L MX-5

Engine removed working with slight bottom-end rattle under moderate load so it was stopped & removed from car to prevent damage.

Engine sold as a complete package only & going concern with all ancillaries in perfect working order before removal. Clutch is included & has lots of life left in it.

€200 collected for everything attached to the engine in the photos given current condition.
Please note: collection only due to size, weight & packaging required to ship.

PM me here or call anytime at weekends or after 5pm weekdays - calls preferred to texts.
No 'best price' calls or lowball offers - price reflects item & condition - negotiations in person only.

Number & pics are in this ad: https://www.donedeal.ie/carparts-for-sa ... k/11194975

Re: Mazda MX5 NC1/MK3 2L VVT LF-VE Engine needing work

PostPosted: Thu, 07 Jan 2016 9:44 +0000
by sidewaysreilly
700 yo yo's for an engine with a wrecked bottom end? Is it not the same basic engine that's in a mondeo ?

Re: Mazda MX5 NC1/MK3 2L VVT LF-VE Engine needing work

PostPosted: Thu, 07 Jan 2016 10:22 +0000
by jpo
Not wrecked, but certainly needs attention sooner rather than later. That I'm not sure about but if you can find one, add the price of a new crank (if it even came to that) + shells all-round + the most expensive labour you know of & find one anywhere near the price in total please show me & I'll happily adjust. ;)

Re: Mazda MX5 NC1/MK3 2L VVT LF-VE Engine needing work

PostPosted: Sun, 01 May 2016 7:37 +0000
by jpo
Prices updated to clear - make me an offer especially if you want to take the engine, 6-speed gearbox, diff, exhaust etc: the worst I'll do is say no. ;)

6-speed + LSD drivetrain ad: viewtopic.php?f=14&t=7729&p=60895
Standard exhaust ad: viewtopic.php?f=14&t=7731&p=60897

Re: Mazda MX5 NC1/MK3 2L VVT LF-VE Engine needing work

PostPosted: Mon, 23 May 2016 6:32 +0000
by jpo
Offers on this even?

Re: Mazda MX5 NC1/MK3 2L VVT LF-VE Engine needing work

PostPosted: Mon, 27 Jun 2016 2:41 +0000
by jpo
Price drop to free up some space - €300 takes it away.

Re: Mazda MX5 NC1/MK3 2L VVT LF-VE Engine needing work

PostPosted: Tue, 28 Jun 2016 12:24 +0000
by AndyJF
I believe its the same 6 speed as the RX8 with a different bell housing. Could be wrong though google has failed me before.

Sent from my A0001 using Tapatalk

Re: Mazda MX5 NC1/MK3 2L VVT LF-VE Engine needing work

PostPosted: Thu, 28 Jul 2016 7:12 +0000
by jpo
Does anyone know where the MK3 owners hang out in Ireland?

Re: Mazda MX5 NC1/MK3 2L VVT LF-VE Engine needing work

PostPosted: Fri, 29 Jul 2016 1:44 +0000
by Fergus
Mk3 owners don't 'hang out' and your selling scrap metal, I'm sorry for saying it but somebody had to as this post is from last January.

Re: Mazda MX5 NC1/MK3 2L VVT LF-VE Engine needing work

PostPosted: Sun, 11 Sep 2016 6:32 +0000
by jpo
If anyone would like to offer a constructive opinion on where I might find a group of MK3 owners to see if it would be of any interest (block or ancillaries) to them please post up. :)

Offers welcome.

Re: Mazda MX5 NC1/MK3 2L VVT LF-VE Engine needing work

PostPosted: Sun, 11 Sep 2016 8:24 +0000
by Fergus
There's a few groups over on FaceBook, here's one of them with over 160 members that I'm in. https://www.facebook.com/groups/701339086660911/
Hope that helps.

Re: Mazda MX5 NC1/MK3 2L VVT LF-VE Engine needing work

PostPosted: Mon, 12 Sep 2016 9:31 +0000
by jpo
Cheers Fergus! I've added the rest of my bits & pieces to that group now.

Re: Mazda MX5 NC1/MK3 2L VVT LF-VE Engine needing work

PostPosted: Fri, 06 Jan 2017 12:14 +0000
by jpo
Sold. :)