full 1.6 turbo kit WANTED!!!!

by **Jizzer** » Thu, 08 May 2014 10:50 +0000

Whats available lookin to get it sorted befor summer is over be nice any way

by **[L'e$kro]** » Fri, 09 May 2014 7:29 +0000

Someone sells a complete car with a turbo on it:

viewtopic.php?f=14&t=5529

It's worth considering as the HKS turbo kit costs more than that:

http://www.mx5parts.co.uk/bolt-turbo-mazda-p-334.html

You could swap the turbo parts and put the UK reg'd one back to standard with parts from yours?

Nico

by **Jizzer** » Wed, 14 May 2014 9:52 +0000

still looking

by **Randy** » Wed, 14 May 2014 10:53 +0000

How much are you looking to spend on this?
I'm currently buying up parts for my own build, and I'm pretty sure it's working out less than buying a full kit.

by **rhysmate** » Wed, 14 May 2014 12:39 +0000

Leskro linked you one?

by **Jizzer** » Mon, 19 May 2014 9:55 +0000

ya i went to see that car and its in bits couldin see it running and couldin see any potential with it

by **Jizzer** » Mon, 19 May 2014 9:57 +0000

Randy wrote:How much are you looking to spend on this?
I'm currently buying up parts for my own build, and I'm pretty sure it's working out less than buying a full kit.

ya i was thinkin of doing it im very impatient haha i have 2grand as a limit

by **Randy** » Tue, 20 May 2014 1:39 +0000

You could do it for 2k I'd imagine, just depends on what parts you want to use, and what turbo you're going with, will there be an intercooler, a fancy ECu, etc.

by **Jizzer** » Tue, 20 May 2014 9:25 +0000

ya defo want a programmable ecu an intercooler and a nice oil cooler have a fella lookin in japland to see he can find anything fuckers keep tryin to rob my car so its in hiding for a wile so ill accumulate them over the summer

by **rhysmate** » Tue, 20 May 2014 9:45 +0000

Can you weld?

by **Jizzer** » Thu, 22 May 2014 7:21 +0000

ya im ok with a welder why ?

by **rhysmate** » Fri, 23 May 2014 12:25 +0000

Makes it a lot cheaper if you make your own manifold and exhaust!

by **Fergus** » Fri, 30 May 2014 6:42 +0000

http://www.mx5nutz.com/forum/index.php? ... tem_id=235

by **Jizzer** » Sat, 07 Jun 2014 7:59 +0000

good spot man how much do ya think to get it shipped or would it be cheaper to drive over for it ?

by **Fergus** » Sat, 07 Jun 2014 8:35 +0000

Dunno, shouldn't think it would cost that much.
I'd get a full list of everything that's going with that block - turbo, mani etc etc and post it up here first before parting with any money though.

It's up for sale as 'Greedy' (could be a typo, or not) and it should be 'Greddy' so don't get burnt !
And it's been up for sale for some time now already.

full 1.6 turbo kit WANTED!!!!

full 1.6 turbo kit WANTED!!!!

Re: full 1.6 turbo kit WANTED!!!!

Re: full 1.6 turbo kit WANTED!!!!

Re: full 1.6 turbo kit WANTED!!!!

Re: full 1.6 turbo kit WANTED!!!!

Re: full 1.6 turbo kit WANTED!!!!

Re: full 1.6 turbo kit WANTED!!!!

Re: full 1.6 turbo kit WANTED!!!!

Re: full 1.6 turbo kit WANTED!!!!

Re: full 1.6 turbo kit WANTED!!!!

Re: full 1.6 turbo kit WANTED!!!!

Re: full 1.6 turbo kit WANTED!!!!

Re: full 1.6 turbo kit WANTED!!!!

Re: full 1.6 turbo kit WANTED!!!!

Re: full 1.6 turbo kit WANTED!!!!

Who is online


	Board index ‹ Other bits and pieces ‹ Wanted Change font size Print view


	Author Message full 1.6 turbo kit WANTED!!!! by Jizzer » Thu, 08 May 2014 10:50 +0000 Whats available lookin to get it sorted befor summer is over be nice any way Jizzer * Posts: 15 Joined: Thu, 06 Jun 2013 9:22 +0000 Top Re: full 1.6 turbo kit WANTED!!!! by [L'e$kro] » Fri, 09 May 2014 7:29 +0000 Someone sells a complete car with a turbo on it: viewtopic.php?f=14&t=5529 It's worth considering as the HKS turbo kit costs more than that: http://www.mx5parts.co.uk/bolt-turbo-mazda-p-334.html You could swap the turbo parts and put the UK reg'd one back to standard with parts from yours? Nico '92 Eunos Roadster V-spec black [L'e$kro] * Posts: 413 Joined: Tue, 16 Aug 2011 11:47 +0000 Location: Cork City Top Re: full 1.6 turbo kit WANTED!!!! by Jizzer** » Wed, 14 May 2014 9:52 +0000 still looking Jizzer * Posts: 15 Joined: Thu, 06 Jun 2013 9:22 +0000 Top Re: full 1.6 turbo kit WANTED!!!! by Randy » Wed, 14 May 2014 10:53 +0000 How much are you looking to spend on this? I'm currently buying up parts for my own build, and I'm pretty sure it's working out less than buying a full kit. Randy * Posts: 279 Joined: Sun, 05 May 2013 11:58 +0000 Location: Letterkenny, Donegal Top Re: full 1.6 turbo kit WANTED!!!! by rhysmate » Wed, 14 May 2014 12:39 +0000 Leskro linked you one? bend the rules............rule the bends --Turbo Mx5 Build Thread Of Epic Power-- rhysmate Posts: 862 Joined: Thu, 16 Jun 2011 4:17 +0000 Location: CORK Top Re: full 1.6 turbo kit WANTED!!!! by Jizzer** » Mon, 19 May 2014 9:55 +0000 ya i went to see that car and its in bits couldin see it running and couldin see any potential with it Jizzer * Posts: 15 Joined: Thu, 06 Jun 2013 9:22 +0000 Top Re: full 1.6 turbo kit WANTED!!!! by Jizzer » Mon, 19 May 2014 9:57 +0000 Randy wrote:How much are you looking to spend on this? I'm currently buying up parts for my own build, and I'm pretty sure it's working out less than buying a full kit. ya i was thinkin of doing it im very impatient haha i have 2grand as a limit Jizzer * Posts: 15 Joined: Thu, 06 Jun 2013 9:22 +0000 Top Re: full 1.6 turbo kit WANTED!!!! by Randy » Tue, 20 May 2014 1:39 +0000 You could do it for 2k I'd imagine, just depends on what parts you want to use, and what turbo you're going with, will there be an intercooler, a fancy ECu, etc. Randy * Posts: 279 Joined: Sun, 05 May 2013 11:58 +0000 Location: Letterkenny, Donegal Top Re: full 1.6 turbo kit WANTED!!!! by Jizzer** » Tue, 20 May 2014 9:25 +0000 ya defo want a programmable ecu an intercooler and a nice oil cooler have a fella lookin in japland to see he can find anything fuckers keep tryin to rob my car so its in hiding for a wile so ill accumulate them over the summer Jizzer * Posts: 15 Joined: Thu, 06 Jun 2013 9:22 +0000 Top Re: full 1.6 turbo kit WANTED!!!! by rhysmate » Tue, 20 May 2014 9:45 +0000 Can you weld? bend the rules............rule the bends --Turbo Mx5 Build Thread Of Epic Power-- rhysmate ** Posts: 862 Joined: Thu, 16 Jun 2011 4:17 +0000 Location: CORK Top Re: full 1.6 turbo kit WANTED!!!! by Jizzer** » Thu, 22 May 2014 7:21 +0000 ya im ok with a welder why ? Jizzer * Posts: 15 Joined: Thu, 06 Jun 2013 9:22 +0000 Top Re: full 1.6 turbo kit WANTED!!!! by rhysmate » Fri, 23 May 2014 12:25 +0000 Makes it a lot cheaper if you make your own manifold and exhaust! bend the rules............rule the bends --Turbo Mx5 Build Thread Of Epic Power-- rhysmate ** Posts: 862 Joined: Thu, 16 Jun 2011 4:17 +0000 Location: CORK Top Re: full 1.6 turbo kit WANTED!!!! by Fergus » Fri, 30 May 2014 6:42 +0000 http://www.mx5nutz.com/forum/index.php? ... tem_id=235 Fergus * Posts: 1912 Joined: Mon, 30 Jul 2007 5:53 +0000 Location: Ireland Top Re: full 1.6 turbo kit WANTED!!!! by Jizzer** » Sat, 07 Jun 2014 7:59 +0000 good spot man how much do ya think to get it shipped or would it be cheaper to drive over for it ? Jizzer * Posts: 15 Joined: Thu, 06 Jun 2013 9:22 +0000 Top Re: full 1.6 turbo kit WANTED!!!! by Fergus » Sat, 07 Jun 2014 8:35 +0000 Dunno, shouldn't think it would cost that much. I'd get a full list of everything that's going with that block - turbo, mani etc etc and post it up here first before parting with any money though. It's up for sale as 'Greedy' (could be a typo, or not) and it should be 'Greddy' so don't get burnt ! And it's been up for sale for some time now already. Fergus *** Posts: 1912 Joined: Mon, 30 Jul 2007 5:53 +0000 Location:** Ireland Top


	Who is online Users browsing this forum: No registered users and 1 guest


	Board index The team • Delete all board cookies • All times are UTC [ DST ]