Page 1 of 2

Cam Angle Sensor Plug & a foot of Wiring badly needed.

PostPosted: Sun, 22 Apr 2012 4:02 +0000
by sidewaysreilly
First time ever i had a Car stop on me. Ah well, a bit of rooting and the problem revealed itself.

The white wire coming out of the CAS sensor plug broke off. Jury rigged it to get home but need the plug and a decent bit of wiring to solder join it back into my loom.

Its a 1.8 mk1 and im not sure if the 1.6 is the same 4 wire jobby but i suspect its the same.


Anyone??????

Re: Cam Angle Sensor Plug & a foot of Wiring badly needed.

PostPosted: Sun, 22 Apr 2012 7:35 +0000
by leamyj
Sean, I have most of the looms off my mk1 but I don't know what connector I'm looking for..put up a pic and I'll have a gander tomorrow??

Re: Cam Angle Sensor Plug & a foot of Wiring badly needed.

PostPosted: Sun, 22 Apr 2012 7:39 +0000
by sidewaysreilly
will do john. Stand by. 4 Wires coming out of it.

Re: Cam Angle Sensor Plug & a foot of Wiring badly needed.

PostPosted: Tue, 24 Apr 2012 10:51 +0000
by sidewaysreilly
anyone?????????????

Re: Cam Angle Sensor Plug & a foot of Wiring badly needed.

PostPosted: Tue, 24 Apr 2012 11:59 +0000
by mx5ideways
I should have that there on my old mk1 at the home place, il check and post it the weekend if it's any good to you, that's the soonest il be able to get up there

Re: Cam Angle Sensor Plug & a foot of Wiring badly needed.

PostPosted: Wed, 25 Apr 2012 12:17 +0000
by leamyj
sidewaysreilly wrote:anyone?????????????


Sorry Seán, was at a wake all evening, I did manage to pull out the loom, looks like I have it, there's just so many different bloody connectors on it. I'm away at a funeral for most of Wednesday, but if you can get to Newbridge I could leave the loom out for you if you like..let me know before ten o'clock on Wednesday morning..by text as I may not get to a computer in the morning.


John

Re: Cam Angle Sensor Plug & a foot of Wiring badly needed.

PostPosted: Wed, 25 Apr 2012 7:08 +0000
by sidewaysreilly
Thanks John/Kieran............away in Donegal all week so may try to find somewhere on the way home . Poor Aimee is gagging to drive her all week and cant .

Re: Cam Angle Sensor Plug & a foot of Wiring badly needed.

PostPosted: Sat, 28 Apr 2012 6:45 +0000
by sidewaysreilly
Sorted. Plug is the same as coil pack and being a deutsch plug, i was able to pull the contacts out and fit them to the new plug.

Re: Cam Angle Sensor Plug & a foot of Wiring badly needed.

PostPosted: Sat, 28 Apr 2012 11:01 +0000
by leamyj
sidewaysreilly wrote:Sorted. Plug is the same as coil pack and being a deutsch plug, i was able to pull the contacts out and fit them to the new plug.


That's how I was getting confused, I could see more than one of what you were looking for on the loom. :roll:

John

Re: Cam Angle Sensor Plug & a foot of Wiring badly needed.

PostPosted: Sat, 28 Apr 2012 11:39 +0000
by sidewaysreilly
ah no bother john. I looked at it again today and loom of the spare engine had 3 pin coils so i took a contact & wire out of one and fitted it to the other to make a new 4 pin plug.

All runnin fine now for Kilbeggin tomorrow.

Re: Cam Angle Sensor Plug & a foot of Wiring badly needed.

PostPosted: Sun, 29 Apr 2012 12:45 +0000
by Paschal
sidewaysreilly wrote:ah no bother john. I looked at it again today and loom of the spare engine had 3 pin coils so i took a contact & wire out of one and fitted it to the other to make a new 4 pin plug.

All runnin fine now for Kilbeggin tomorrow.


You going to the american car show? Enjoy

Re: Cam Angle Sensor Plug & a foot of Wiring badly needed.

PostPosted: Sun, 29 Apr 2012 6:42 +0000
by sidewaysreilly
Very good show P, lots of cars trucks and stalls and "East bound and down" blaring thro the PA .......YEEEEEHAWWWWW.

Worth organising a run up next year.

Re: Cam Angle Sensor Plug & a foot of Wiring badly needed.

PostPosted: Sun, 29 Apr 2012 9:04 +0000
by Paschal
I can organise that, on my doorstep

Re: Cam Angle Sensor Plug & a foot of Wiring badly needed.

PostPosted: Mon, 30 Apr 2012 8:25 +0000
by leamyj
Paschal wrote:I can organise that, on my doorstep



Will we have maps? :mrgreen:

Re: Cam Angle Sensor Plug & a foot of Wiring badly needed.

PostPosted: Wed, 02 May 2012 8:54 +0000
by Paschal
leamyj wrote:
Paschal wrote:I can organise that, on my doorstep



Will we have maps? :mrgreen:


Who needs maps :oops: :oops: :oops: