Looking for a 4.3 or higher ratio ring and pinion. I know they are rare but you never know what people have hiding
Sent from my SM-G900F using Tapatalk
Users browsing this forum: No registered users and 5 guests
| |||||
Ring and pinionLooking for a 4.3 or higher ratio ring and pinion. I know they are rare but you never know what people have hiding
Sent from my SM-G900F using Tapatalk
Re: Ring and pinion4.3 very common and available in nearly all MK2 1.8 MX-5's. The only other ratios available on the MK2 1.8's are 3.9 for the JDM spec VS or RS and 3.6 for UKDM MK2.5 S-VT
Re: Ring and pinionHi if they are standard on mk2 we have some.Thought they were 4.1 normally? Is 4.3 not early mk1. 1.6 ?(smaller diff)
Re: Ring and pinionYes, The Mk1 1.6 was 4.3 (but different size). The Mk1 (NA8C) 1.8 is 4.1 and the standard Mk2 (NB8C) is 4.3
Re: Ring and pinionI didnt know about the mk2s being 4.3. Rang kia today as the older sportage has a mazda diff in it and is a 4.7 ratio. €350 plus vat for the ring and pinion which i didnt think was to bad
Sent from my SM-G900F using Tapatalk
Re: Ring and pinionYep, 4.625.. Not a bad price for new parts. I paid €270 delivered for a second hand set last year..
Re: Ring and pinionHi Scallan ,yeah we have one then.
Re: Ring and pinion
Nice id say i will go with it. The storeman in kia was not 1 bit nice do he couldnt understand how i got the part number and kept asking for a reg. Sent from my SM-G900F using Tapatalk
Re: Ring and pinion0K01427110 thats the part number also just incase anybody wants to do the same
Sent from my SM-G900F using Tapatalk
Re: Ring and pinionGreat stuff.. Very useful info.. Thanks Scallan..
| ||
Who is onlineUsers browsing this forum: No registered users and 5 guests | ||