Login    Register

stalling mx5 1,6 1991

Post your problems and maybe someone can help
  • Author
    Message

stalling mx5 1,6 1991

Postby stag76 » Sat, 10 Oct 2015 11:55 +0000

hi lads,i have a mx5 that has sat up for a year.
it started easy first time off,but it only ticked over for around 5mins and cut out.

i thought it was fuel,so popped in some,same thing it starts and cuts out after 5sec,wont rev,just cuts out straight of if you try to rev it.

i changed the fuel pump over then from a running car,same problem,starts and cuts out after 5sec,wont rev.

any ideas,it ran lovely last year,i did nothing to it,made no changes.

let me know your thoughts.

thanks jason
stag76
***
 
Posts: 284
Joined: Fri, 08 Jul 2011 12:32 +0000

Re: stalling mx5 1,6 1991

Postby davith501 » Sun, 11 Oct 2015 9:33 +0000

I'd check Ht leads too. If it was parked for a while moisture build up would've affected them. Also, I'd check air intake sensor. Good luck.
Icon
RS
Mk1
davith501
****

User avatar
 
Posts: 626
Joined: Thu, 29 Nov 2012 9:31 +0000

Re: stalling mx5 1,6 1991

Postby stag76 » Sun, 11 Oct 2015 2:38 +0000

strang thing is she started first time after sitting up,ran for 7/8mins then stopped,she will start then stall,you can keep doing it til the cows come home.

thanks for the ideas. il look into the air sensor end of things
stag76
***
 
Posts: 284
Joined: Fri, 08 Jul 2011 12:32 +0000

Re: stalling mx5 1,6 1991

Postby Steve » Sun, 11 Oct 2015 10:21 +0000

fuel filter?
Steve
Site Admin

User avatar
 
Posts: 5510
Joined: Wed, 05 Mar 2008 10:16 +0000

Re: stalling mx5 1,6 1991

Postby davith501 » Sun, 11 Oct 2015 10:59 +0000

Also, check passengers side footwell for dampness if it sat outside. If it is check if it has affected ecu as it did on mine..
Icon
RS
Mk1
davith501
****

User avatar
 
Posts: 626
Joined: Thu, 29 Nov 2012 9:31 +0000

Re: stalling mx5 1,6 1991

Postby emarkey » Mon, 12 Oct 2015 2:11 +0000

That happned to me when i left my intake sensor plugged out by mistake. Maybe check that
emarkey
***
 
Posts: 271
Joined: Tue, 06 May 2014 11:59 +0000

Re: stalling mx5 1,6 1991

Postby stag76 » Tue, 13 Oct 2015 9:32 +0000

hi lads,thanks for all the info,yes i plan to relpace fuel filter with new 1.

passanger carpet damp,so i dryed it,but damp under neath,il remove carpet at weekend.

ive never gone near the sensor near intake.

its just strange she started so easily after a year non use,ran very sweetly,no tappet noises,and then after 7/8mins just stopped! restarts but dies with in a few swconds.

il do as you all say,dry out carpet / ecu/etc and replace fuel filter.

thanks,il let you know how i get on
stag76
***
 
Posts: 284
Joined: Fri, 08 Jul 2011 12:32 +0000

Re: stalling mx5 1,6 1991

Postby franksm » Wed, 14 Oct 2015 8:15 +0000

Unplug the AFM and see if it runs in "limp home mode" - if it does, it means the AFM needs replaced.
Other than that, could be the throttle body and the electronic positioning switch built into it.
It's a small world after all. It's a small, small world
franksm
****

User avatar
 
Posts: 899
Joined: Mon, 30 Jul 2007 6:23 +0000
Location: Sometimes Dublin, sometimes Belfast

Re: stalling mx5 1,6 1991

Postby sidewaysreilly » Mon, 19 Oct 2015 10:30 +0000

Move the flap on the afm and hold it open and see will it keep running.
The perfection of a Car's beauty is that nothing should be there for beauty's sake.
sidewaysreilly
*****

User avatar
 
Posts: 2113
Joined: Wed, 02 Sep 2009 5:56 +0000
Location: Around Ireland

Re: stalling mx5 1,6 1991

Postby stag76 » Thu, 22 Oct 2015 8:06 +0000

right lads a up date on the problem mx5.

started the car this morning,started first turn of the key,ticked over for 3mins,reved freely and all,then it started to pulse up and down then stopped! i restart it runs for 2/3sec and stops,you can do that 20 times and it starts and stops.

now,as mentioned i lifter the passanger carpet,oh lord,there was at least 3inch water,i stripped out carpet,and removed the very rusty ecu shield,the bottom 3rd of the ecu had been sitting in water,for a long time! i removed ecu,opened it up and it had rusty water in it!!!. ive stripped the ecu and removed its casing,ive given it a chemical clean with contact cleaner etc,and have dried it out in warm oven.

this afternoon i plugged ecu back into the car.

same problem.starts and stalls.

so do you all think the ecu is damaged due to water,its fried itself and is onlt half working,only runs car when cold and then when warm it stalls??


i did the disconnecting of afm and throttle position etc,all the same.

so ecu change you all think ,ecu number is B63HC, any one have one at a good price??

car was fine when it was used last on the road,but the sitting up seems to have f%ked it up,and floating ecu hasnt helped.

let me know your thoughts

jason
stag76
***
 
Posts: 284
Joined: Fri, 08 Jul 2011 12:32 +0000

Re: stalling mx5 1,6 1991

Postby davith501 » Thu, 22 Oct 2015 8:49 +0000

Same thing happened to me. When I was picking the car up it started and was running ok. The next day, as you say, only runs for few seconds and stalls.. We checked everything that could cause the problem but no luck. Swapped for new ecu - off she went! Give autocheck a shout he'll sort you out.
Icon
RS
Mk1
davith501
****

User avatar
 
Posts: 626
Joined: Thu, 29 Nov 2012 9:31 +0000

Re: stalling mx5 1,6 1991

Postby stag76 » Thu, 22 Oct 2015 9:22 +0000

hi dav,thanks for the advice,yes i txt robert there and he can sort me out with ecu..

il keep you posted on what happens next.

jay
stag76
***
 
Posts: 284
Joined: Fri, 08 Jul 2011 12:32 +0000

Re: stalling mx5 1,6 1991

Postby stag76 » Sat, 21 Nov 2015 7:35 +0000

all sorted :D .

as mentioned my car had alot of water in the passanger side foot well.

i got a new ecu,put it in,and turned the key and away she went,runs and rev's.

i let it run for a good 30min,all good.

so thats it realy.

got the ecu off a lad in killkenny for 10euro :shock: ,yes 10euro,cheap fix in the end.

jay
stag76
***
 
Posts: 284
Joined: Fri, 08 Jul 2011 12:32 +0000

Re: stalling mx5 1,6 1991

Postby davith501 » Sun, 22 Nov 2015 8:54 +0000

Good to hear you got it sorted at the end and an ecu for a tenner sounds like a real bargain! Nice!
Icon
RS
Mk1
davith501
****

User avatar
 
Posts: 626
Joined: Thu, 29 Nov 2012 9:31 +0000

Return to Engine & drivetrain

Who is online

Users browsing this forum: No registered users and 5 guests

cron