mk2 interior into mk1

[hookieal]

hi guys, I'm thinking about fitting a mk2 interior into my mk1 , dash, door cards and seats. Seats are a straight swap just remove seatbelt thingy lol from mk1. I know there will be some wiring mods needed for Windows and hazards and Speedos are different. has anybody done this and could offer advice . are the fitting points for dash the same on both? am guessing there is some mods for heater matrix needed also , will mk1 clock cluster fit mk2 dash? is it a stupid idea lol

Al

[leamyj]

Jeez, good luck with that, I'd imagine that there'll be a lot of modifications needed to complete the job.

[scallan]

have a look on mx5nutz there is a few ppl with it done

[hookieal]

cheers guys , I think im gonna go ahead and do this , its nice to have a little winter project

[MX5Spares]

Loads of cars in UK with this done!

[Yolo]

Al there is a small forum called mazdamenders.net and they have done it. There is a pretty good walk through it with pics so they should definitely be able to help...

[MX5Spares]

I know Wayne from mazda menders if you need any info but it has been done several times. We have all the mk2 bits you would need incl seats ,door cards etc and full car here for breaking if you need odds' n' ends etc.086 8226506 Robert ps we have mk2 beige interior also might suit your colour ??

[Yolo]

Hi Robert he mentioned he knew you when I said you were getting me the suspension. Thanks for them btw. Still not fitted but getting there. Old ones out just waiting on the bushes arriving....

[MX5Spares]

No problem!!

[Mazda Mender]

Did you sort this project? it is the wiring that will give the most head ache but no biggie as long as you know someone that as already struggled to patch them together and as them drawn out in his personal hong kong book of kung fu
Swapping the dash is easy peasy buddy...
http://www.mazdamenders.net/forum/viewt ... 117&t=2443
Shout if i can be of any help.
M-m

[MX5Spares]

Its only the heater unit itself apparently thats wired differently plus you have to make up small loom for hazard light switch to extend it to lower position on mk2 dash.Pop up lights will also have to be positioned elsewhere on dash of course but its nt neccessary to have seperate switch as most people dont pop them up anyway when they are turned off.!!